Cadillac ATS 2013-2019 Drivetrain Specifications
Explore the drivetrain specifications of the 2013-2019 Cadillac ATS, including engine options, transmission types, and drive systems. Ideal for owners, technicians, and enthusiasts looking to understand or enhance their vehicle's performance.
Overview Specifications
This document provides detailed specifications and technical information about the drivetrain system of the 2013-2019 Cadillac ATS. It covers key components such as engine options, transmission systems, and drivetrain configurations. Use this guide to understand the performance and engineering behind the ATS's drivetrain. The 'howTo' section explains how to navigate and search for specific details, while the 'sections' provide in-depth information on various aspects of the drivetrain.
How to Use
To search for specific details, use the search bar at the top of the page. Enter keywords like 'transmission' or 'engine specs' to quickly locate relevant information. You can also use filters to narrow down results by year or model.
Navigate through the document by scrolling or using the table of contents. Each section is clearly labeled, and subsections are collapsible for easy access. Click on a section title to expand it and view detailed information.
Key Specifications
Engine Power (2.0L Turbo)
272 hp
Torque (2.0L Turbo)
295 lb-ft
Transmission Options
6-Speed Auto/Manual
Drivetrain Options
RWD/AWD
Fuel Efficiency (2.0L Turbo)
22/31 mpg
Available Specifications
Engine Options
The 2013-2019 Cadillac ATS offers a range of engine options designed to deliver a balance of power and efficiency. This section details the available engines, including their specifications and performance metrics.
Engine Options
The 2013-2019 Cadillac ATS offers a range of engine options designed to deliver a balance of power and efficiency. This section details the available engines, including their specifications and performance metrics.
2.0L Turbocharged Inline-4
- 272 horsepower
- 295 lb-ft of torque
- Direct fuel injection
- 16-valve DOHC configuration
- Turbocharged for enhanced performance
- Available in both rear-wheel and all-wheel drive
3.6L V6
- 335 horsepower
- 285 lb-ft of torque
- Direct fuel injection
- 24-valve DOHC configuration
- Naturally aspirated engine
- Standard in ATS-V performance models
Transmission Systems
The Cadillac ATS is equipped with advanced transmission systems that ensure smooth gear shifts and optimal performance. This section covers the automatic and manual transmission options available for the ATS.
Transmission Systems
The Cadillac ATS is equipped with advanced transmission systems that ensure smooth gear shifts and optimal performance. This section covers the automatic and manual transmission options available for the ATS.
6-Speed Automatic Transmission
- Standard on most models
- Electronic precision shift
- Adaptive shift control
- Paddle shifters available
- Smooth and responsive performance
- Optimized for fuel efficiency
6-Speed Manual Transmission
- Available on select models
- Short-throw shifter
- Enhanced driver engagement
- Standard on ATS-V coupe
- Lightweight and durable design
- Improved acceleration control
Drivetrain Configurations
The Cadillac ATS offers both rear-wheel drive and all-wheel drive configurations to suit different driving preferences and conditions. This section explains the features and benefits of each drivetrain option.
Drivetrain Configurations
The Cadillac ATS offers both rear-wheel drive and all-wheel drive configurations to suit different driving preferences and conditions. This section explains the features and benefits of each drivetrain option.
Rear-Wheel Drive (RWD)
- Standard configuration for most models
- Improved weight distribution
- Enhanced handling and performance
- Ideal for sporty driving
- Available with all engine options
- Lower maintenance costs
All-Wheel Drive (AWD)
- Available as an option
- Improved traction in adverse conditions
- Automatic torque distribution
- Enhanced stability and control
- Ideal for all-weather performance
- Available with 2.0L Turbo engine
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Overview
- Type
- Rear-wheel drive / All-wheel drive
- Configuration
- Transverse engine layout
- Platform
- GM Alpha platform
- Material
- High-strength steel
- Location
- Underbody integrated
Dimensions
- Driveshaft Length
- 56.3 inches (143 cm)
- Axle Width
- 61.8 inches (157 cm)
- Transfer Case Height
- 12.6 inches (32 cm)
- Differential Weight
- 78.5 lbs (35.6 kg)
- Propeller Shaft Diameter
- 3.15 inches (8 cm)
- Final Drive Ratio
- 3.27:1
- Torque Capacity
- 369 lb-ft (500 Nm)
Materials
- Driveshaft
- Carbon steel
- Differential Case
- Aluminum alloy
- Axle Shafts
- Forged steel
- Transfer Case
- Magnesium alloy
- Mounts
- Rubber compound with steel inserts
Features
- Drivetrain Technologies
-
- Electronic limited-slip differential
- Active torque transfer system
- Intelligent AWD with predictive control
- Launch control system
- Performance Enhancements
-
- Optimized gear ratios
- Enhanced cooling system
- Low friction bearings
- High-capacity clutch packs
- integration Features
-
- Seamless powertrain integration
- Modular assembly design
- Integrated vibration dampers
- Compact transfer case
Safety Features
- Structural Safety
-
- Reinforced driveshaft tunnel
- Impact-resistant differential housing
- Fail-safe transfer case design
- Electronic Safety
-
- Traction control system
- Stability control integration
- Torque vectoring system
Comfort Features
- Noise Reduction
-
- Acoustic damping materials
- Precision-balanced components
- Isolated mounting system
- Vibration Control
-
- Dynamic dampers
- Flexible couplings
- Hydraulic mounts
Accessories
- Upgrade Options
-
- Performance differential
- Heavy-duty driveshaft
- Enhanced cooling kit
- Protection Components
-
- Skid plates
- Differential guard
- Transfer case shield
- Maintenance Tools
-
- Fluid pump kit
- Alignment tools
- Torque wrench set
Maintenance
- Service interval
- Every 30,000 miles or 24 months
- Service Items
-
- Differential fluid change
- Transfer case fluid inspection
- Driveshaft inspection
- Mount condition check
- Seal integrity verification
- Maintenance Notes
- Use only GM-approved fluids and lubricants
Warranty
- Basic Coverage
- 3 years / 36,000 miles
- Powertrain Coverage
- 5 years / 60,000 miles
- Corrosion Coverage
- 6 years / 100,000 miles
- Emissions Coverage
- 8 years / 80,000 miles
- Warranty Terms
- Transferable with ownership
Production Details
- Manufacturer
- General Motors
- Manufacturing Process
-
- Precision machining
- Robotic assembly
- Laser alignment
- Quality Control
- Testing Procedures: Dynamic balance test, Torque capacity test, Endurance testinginspection Points: Gear meshing, Bearing alignment, Seal integrity
- Sustainability Practices
-
- Recycled materials
- Energy-efficient production
- Waste reduction initiatives
- Production Metrics
- Units Per Day: 250Defect Rate: 0.05%Production Time: 4.5 hours per unit
Service Information for drivetrain Service
Maintenance and service requirements specific to this component
- Inspect differential fluid condition
- Check driveshaft for wear or damage
- Verify transfer case operation
- Inspect mounts and bushings
- Check for fluid leaks
Use only GM-approved fluids and lubricants
- Replace differential fluid
- Inspect axle shafts for wear
- Check transfer case fluid level
- Verify drivetrain alignment
- Test electronic control systems
Requires specialized diagnostic tools
- Replace transfer case fluid
- Inspect and replace seals if necessary
- Check clutch packs in AWD system
- Verify torque transfer operation
- Perform full drivetrain diagnostics
Major service requiring lift and specialized equipment
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the technical specifications of the 2013-2019 Cadillac ATS drivetrain?
What are the technical specifications of the 2013-2019 Cadillac ATS drivetrain?
The 2013-2019 Cadillac ATS features a range of drivetrain options, including rear-wheel drive (RWD) and all-wheel drive (AWD) configurations. Engine options include a 2.5L 4-cylinder, 3.6L V6, and a 2.0L turbocharged 4-cylinder. The transmissions available are a 6-speed automatic or a 6-speed manual. The drivetrain is compatible with both gasoline engines and includes features like magnetic ride control and Brembo brakes for enhanced performance.
Q2 What are the maintenance requirements for the Cadillac ATS drivetrain?
What are the maintenance requirements for the Cadillac ATS drivetrain?
Regular maintenance for the Cadillac ATS drivetrain includes checking and maintaining proper fluid levels (transmission, differential, and transfer case), inspecting drive belts and axles for wear, and ensuring proper tire pressure. Recommended maintenance intervals include fluid changes every 30,000 to 60,000 miles, depending on driving conditions. Always refer to the owner's manual for specific recommendations.
Q3 How do I install or replace drivetrain components on the Cadillac ATS?
How do I install or replace drivetrain components on the Cadillac ATS?
Replacing drivetrain components such as axles or differential components requires specialized tools and knowledge. Start by safely lifting the vehicle and removing the wheels. Disconnect the battery and drain the appropriate fluids. Use a torque wrench to remove bolts and components, following factory specifications. Reinstall new components in the reverse order of removal, ensuring all bolts are torqued to the correct specifications. Consult a professional if unsure.
Q4 How do I troubleshoot common drivetrain issues in the Cadillac ATS?
How do I troubleshoot common drivetrain issues in the Cadillac ATS?
Common drivetrain issues include vibrations, noises, or loss of traction. Start by checking for loose or worn components, such as axle boots or CV joints. Use an OBD-II scanner to check for fault codes. Inspect the differential and transfer case for leaks or damage. If vibrations occur, check tire balance and alignment. Address any issues promptly to prevent further damage.
Q5 How can I optimize the performance of the Cadillac ATS drivetrain?
How can I optimize the performance of the Cadillac ATS drivetrain?
To optimize the performance of the Cadillac ATS drivetrain, ensure regular maintenance is performed, including fluid changes and inspections. Upgrade to high-performance tires and align the suspension for improved handling. Consider aftermarket tuning for the engine and transmission to enhance power delivery. Additionally, lightweight alloy wheels and performance brake pads can improve overall drivetrain efficiency and responsiveness.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Cadillac ATS Service Manual
Coming SoonA comprehensive guide covering technical specifications, maintenance schedules, and repair procedures for the 2013-2019 Cadillac ATS drivetrain.
Technical Service Bulletin (TSB) - Drivetrain Updates
Coming SoonOfficial updates and technical bulletins from General Motors addressing drivetrain-related issues and improvements for the Cadillac ATS.
Cadillac ATS Parts Catalog
Coming SoonA detailed catalog of genuine GM parts for the Cadillac ATS drivetrain, including axles, differentials, and transmission components.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.